--- gcc-5.2.0-orig/configure	2015-05-03 18:29:57.000000000 +0100
+++ gcc-5.2.0/configure	2016-04-11 13:16:18.655000792 +0100
@@ -581,6 +581,7 @@
 DLLTOOL_FOR_TARGET
 AS_FOR_TARGET
 AR_FOR_TARGET
+GM2_FOR_TARGET
 GOC_FOR_TARGET
 GFORTRAN_FOR_TARGET
 GCJ_FOR_TARGET
@@ -614,6 +615,7 @@
 NM_FOR_BUILD
 LD_FOR_BUILD
 LDFLAGS_FOR_BUILD
+GM2_FOR_BUILD
 GOC_FOR_BUILD
 GFORTRAN_FOR_BUILD
 GCJ_FOR_BUILD
@@ -754,6 +756,7 @@
 enable_libquadmath
 enable_libquadmath_support
 enable_libada
+enable_libgm2
 enable_libssp
 enable_libstdcxx
 enable_liboffloadmic
@@ -828,6 +831,7 @@
 GCJ_FOR_TARGET
 GFORTRAN_FOR_TARGET
 GOC_FOR_TARGET
+GM2_FOR_TARGET
 AR_FOR_TARGET
 AS_FOR_TARGET
 DLLTOOL_FOR_TARGET
@@ -1479,6 +1483,7 @@
   --disable-libquadmath-support
                           disable libquadmath support for Fortran
   --enable-libada         build libada directory
+  --enable-libgm2         build libgm2 directory
   --enable-libssp         build libssp directory
   --disable-libstdcxx     do not build libstdc++-v3 directory
   --enable-liboffloadmic=ARG
@@ -1601,6 +1606,8 @@
               GFORTRAN for the target
   GOC_FOR_TARGET
               GOC for the target
+  GM2_FOR_TARGET
+              GM2 for the target
   AR_FOR_TARGET
               AR for the target
   AS_FOR_TARGET
@@ -2759,6 +2766,7 @@
 		${libgcj} \
 		target-libobjc \
 		target-libada \
+		target-libgm2 \
 		target-libgo"
 
 # these tools are built using the target libraries, and are intended to
@@ -3065,6 +3073,15 @@
   noconfigdirs="$noconfigdirs gnattools"
 fi
 
+# Check whether --enable-libgm2 was given.
+if test "${enable_libgm2+set}" = set; then :
+  enableval=$enable_libgm2; ENABLE_LIBGM2=$enableval
+else
+  ENABLE_LIBGM2=yes
+fi
+
+
+
 # Check whether --enable-libssp was given.
 if test "${enable_libssp+set}" = set; then :
   enableval=$enable_libssp; ENABLE_LIBSSP=$enableval
@@ -4001,6 +4018,7 @@
   GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
   GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
   GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
+  GM2_FOR_BUILD=${GM2_FOR_BUILD-gm2}
   DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
   LD_FOR_BUILD=${LD_FOR_BUILD-ld}
   NM_FOR_BUILD=${NM_FOR_BUILD-nm}
@@ -4015,6 +4033,7 @@
   GCJ_FOR_BUILD="\$(GCJ)"
   GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
   GOC_FOR_BUILD="\$(GOC)"
+  GM2_FOR_BUILD="\$(GM2)"
   DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
   LD_FOR_BUILD="\$(LD)"
   NM_FOR_BUILD="\$(NM)"
@@ -7624,6 +7643,7 @@
 
 
 
+
 # Generate default definitions for YACC, M4, LEX and other programs that run
 # on the build machine.  These are used if the Makefile can't locate these
 # programs in objdir.
@@ -10839,6 +10859,167 @@
 
 
 
+if test -n "$GM2_FOR_TARGET"; then
+  ac_cv_prog_GM2_FOR_TARGET=$GM2_FOR_TARGET
+elif test -n "$ac_cv_prog_GM2_FOR_TARGET"; then
+  GM2_FOR_TARGET=$ac_cv_prog_GM2_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_GM2_FOR_TARGET"; then
+  for ncn_progname in gm2; do
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_GM2_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$GM2_FOR_TARGET"; then
+  ac_cv_prog_GM2_FOR_TARGET="$GM2_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_GM2_FOR_TARGET="${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+GM2_FOR_TARGET=$ac_cv_prog_GM2_FOR_TARGET
+if test -n "$GM2_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GM2_FOR_TARGET" >&5
+$as_echo "$GM2_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  done
+fi
+
+if test -z "$ac_cv_prog_GM2_FOR_TARGET" && test -n "$with_build_time_tools"; then
+  for ncn_progname in gm2; do
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+    if test -x $with_build_time_tools/${ncn_progname}; then
+      ac_cv_prog_GM2_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+      break
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+  done
+fi
+
+if test -z "$ac_cv_prog_GM2_FOR_TARGET"; then
+  for ncn_progname in gm2; do
+    if test -n "$ncn_target_tool_prefix"; then
+      # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_GM2_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$GM2_FOR_TARGET"; then
+  ac_cv_prog_GM2_FOR_TARGET="$GM2_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_GM2_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+GM2_FOR_TARGET=$ac_cv_prog_GM2_FOR_TARGET
+if test -n "$GM2_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GM2_FOR_TARGET" >&5
+$as_echo "$GM2_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    fi
+    if test -z "$ac_cv_prog_GM2_FOR_TARGET" && test $build = $target ; then
+      # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_GM2_FOR_TARGET+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$GM2_FOR_TARGET"; then
+  ac_cv_prog_GM2_FOR_TARGET="$GM2_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_GM2_FOR_TARGET="${ncn_progname}"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+GM2_FOR_TARGET=$ac_cv_prog_GM2_FOR_TARGET
+if test -n "$GM2_FOR_TARGET"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GM2_FOR_TARGET" >&5
+$as_echo "$GM2_FOR_TARGET" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    fi
+    test -n "$ac_cv_prog_GM2_FOR_TARGET" && break
+  done
+fi
+
+if test -z "$ac_cv_prog_GM2_FOR_TARGET" ; then
+  set dummy gm2
+  if test $build = $target ; then
+    GM2_FOR_TARGET="$2"
+  else
+    GM2_FOR_TARGET="${ncn_target_tool_prefix}$2"
+  fi
+else
+  GM2_FOR_TARGET="$ac_cv_prog_GM2_FOR_TARGET"
+fi
+
+
+
 cat > conftest.c << \EOF
 #ifdef __GNUC__
   gcc_yay;
@@ -14055,6 +14236,51 @@
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
 $as_echo "host tool" >&6; }
   else
+    # We need a cross tool
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+  fi
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target gm2" >&5
+$as_echo_n "checking where to find the target gm2... " >&6; }
+if test "x${build}" != "x${host}" ; then
+  if expr "x$GM2_FOR_TARGET" : "x/" > /dev/null; then
+    # We already found the complete path
+    ac_dir=`dirname $GM2_FOR_TARGET`
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+  else
+    # Canadian cross, just use what we found
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+  fi
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  case ,${enable_languages}, in
+    *,gm2,*) ;;
+    *) ok=no ;;
+  esac
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    GM2_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgm2 -B$$r/$(HOST_SUBDIR)/gcc/'
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+  elif expr "x$GM2_FOR_TARGET" : "x/" > /dev/null; then
+    # We already found the complete path
+    ac_dir=`dirname $GM2_FOR_TARGET`
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    GM2_FOR_TARGET='$(GM2)'
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+  else
     # We need a cross tool
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
 $as_echo "pre-installed" >&6; }
