/testing/guestbin/swan-prep --x509
Preparing X.509 files
north #
 # ensure that clear text does not get through
north #
 iptables -A INPUT -i eth1 -s 192.0.2.254/32 -j LOGDROP
north #
 # confirm clear text does not get through
north #
 ping -c 4 -n -I 192.0.3.254 192.0.2.254
PING 192.0.2.254 (192.0.2.254) from 192.0.3.254 : 56(84) bytes of data.
--- 192.0.2.254 ping statistics ---
4 packets transmitted, 0 received, 100% packet loss, time XXXX
north #
 ipsec start
Redirecting to: systemctl start ipsec.service
north #
 /testing/pluto/bin/wait-until-pluto-started
north #
 ipsec auto --add northnet-eastnet-nat
002 added connection description "northnet-eastnet-nat"
north #
 ipsec whack --impair suppress-retransmits
north #
 echo "initdone"
initdone
north #
 ipsec auto --up northnet-eastnet-nat
002 "northnet-eastnet-nat" #1: initiating Main Mode
1v1 "northnet-eastnet-nat" #1: STATE_MAIN_I1: initiate
1v1 "northnet-eastnet-nat" #1: STATE_MAIN_I2: sent MI2, expecting MR2
002 "northnet-eastnet-nat" #1: I am sending my cert
002 "northnet-eastnet-nat" #1: I am sending a certificate request
1v1 "northnet-eastnet-nat" #1: STATE_MAIN_I3: sent MI3, expecting MR3
002 "northnet-eastnet-nat" #1: Peer ID is ID_DER_ASN1_DN: 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
002 "northnet-eastnet-nat" #1: certificate verified OK: E=user-east@testing.libreswan.org,CN=east.testing.libreswan.org,OU=Test Department,O=Libreswan,L=Toronto,ST=Ontario,C=CA
003 "northnet-eastnet-nat" #1: Authenticated using RSA
004 "northnet-eastnet-nat" #1: STATE_MAIN_I4: ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA2_256 group=MODP2048}
002 "northnet-eastnet-nat" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO
1v1 "northnet-eastnet-nat" #2: STATE_QUICK_I1: initiate
004 "northnet-eastnet-nat" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP/NAT=>0xESPESP <0xESPESP xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=192.1.2.23:4500 DPD=passive}
north #
 ping -n -c 3 -I 192.0.3.254 192.0.2.254
PING 192.0.2.254 (192.0.2.254) from 192.0.3.254 : 56(84) bytes of data.
[ 00.00] IN=eth1 OUT= MAC=12:00:00:96:96:49:12:00:00:32:64:ba:08:00 SRC=192.0.2.254 DST=192.0.3.254 LEN=XXXX TOS=0x00 PREC=0x00 TTL=64 ID=XXXXX PROTO=ICMP TYPE=0 CODE=0 ID=XXXX SEQ=1 
[ 00.00] IN=eth1 OUT= MAC=12:00:00:96:96:49:12:00:00:32:64:ba:08:00 SRC=192.0.2.254 DST=192.0.3.254 LEN=XXXX TOS=0x00 PREC=0x00 TTL=64 ID=XXXXX PROTO=ICMP TYPE=0 CODE=0 ID=XXXX SEQ=2 
[ 00.00] IN=eth1 OUT= MAC=12:00:00:96:96:49:12:00:00:32:64:ba:08:00 SRC=192.0.2.254 DST=192.0.3.254 LEN=XXXX TOS=0x00 PREC=0x00 TTL=64 ID=XXXXX PROTO=ICMP TYPE=0 CODE=0 ID=XXXX SEQ=3 
--- 192.0.2.254 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time XXXX
north #
 echo done
done
north #
north #
 grep 'Result using RFC 3947' /tmp/pluto.log
| NAT-Traversal: Result using RFC 3947 (NAT-Traversal) sender port 500: I am behind NAT
north #
 ../bin/check-for-core.sh
north #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi

